670/675 Rear Swivel/Tilt-Over
Keyboard Tray with Teardrop Mouse Tray - Optional Quick Change
- Thinline Keyboard Tray
- Radiused 11 1/4”D x 19”W tray with non-skid keyboard pads
- Thin profile, 1/4” phenolic laminate
- Color-graphite, suede finish
- Palm Rest Options:
- Molded gel with black lycra fabric covering (shown)
- Medium-density foam cushion with black leather look vinyl covering
- Swivel/Tilt-Over Mouse Tray— Rear
- 9” diameter, phenolic laminate tray attaches at rear of keyboard
- Rotates closely above keyboard
- Tilts independently of keyboard tray
- Knob tilt adjustment allows a tilt range from 15° positive to 15° negative
- Transfer mouse tray from right to left using simple tools (manual change 670)
- Order Quick Change (675) to transfer mouse tray easily from right to left with no tools.
- Optical Mouse-Ready Pad Options:
- Standard black Lexan® with repositionable plastic mouse retainer with integral cord clip
- Molded gel with black lycra fabric covering with integral raised perimeter mouse retainer
Quick change mouse tray mechanism.
Push to engage, pull to release.
Mouse Pad Options
(A) Standard black Lexan® mouse pad
(B) Molded black lycra gel mouse pad.
Keyboard trays
| Item Number | Palm Rest | Mouse Pad |
| 670GA or 675GA | Gel | Lexan® |
| 670GB or 675GB | Gel | Gel |
| 670LA or 675LA | Leather look | Lexan® |
| 670LB or 675LB | Leather look | Gel |
OptiRangeTM Articulating Arms
| Item Number | Articulating Arm | Length/Track Style |
| R5XE19 | Revolution | 19" Glide |
| RMXE22 | Revolution Max Sit/Stand | 21 3/4" Glide |
| 5NXE19 | Profile | 19" Glide |
Revolution R5XE19
Intuitive Tilt
Revolution Max Sit/Stand
RMXE22
Intuitive Tilt
Profile 5NXE19
Manual Tilt
Straight Worksurfaces:
Condition: Unobstructed depths of 19” or greater. For sit/stand arm, depth 22” or greater. For lesser depths, see arm options pages click here.
Radiused Corner Worksurfaces
Condition: A minimum radius of 12” and unobstructed depth of 22” or greater, for all recommended arms.
- Radius Calculation:
- Dimension A minus Dimension B = Radius
- OR
- Dimension C minus Dimension D = Radius
Diagonal Corner Worksurfaces:
Condition: A minimum diagonal of 17” and unobstructed depth of 22” or greater, for all recommended arms.
Diagonal Calculation: If diagonal is not known, please call Customer Service with dimensions E though J for calculation.
For a radius less than 12” or a diagonal less than 17”, use square corner solution.
Square Corner Condition Solution I:
Condition: Two worksurfaces meet at right angles. A minimum diagonal of 17” and unobstructed depth of 22” or greater must be created. Select a Corner Maker to create this solution with trays and arms from this page.