500 Swivel-Under

Keyboard Tray with Teardrop Mouse Tray

Thinline Keyboard Tray
Radiused 10”D x 19”W tray with non-skid keyboard pads
Thin profile, 1/4” phenolic laminate
Unsurpassed platform strength with maximum leg & knee clearance
Color-graphite, suede finish

Palm Rest Options:
Molded gel with black lycra fabric covering (shown)
Medium-density foam cushion with black leather look vinyl covering

Teardrop Swivel-Under Mouse Tray
9” diameter, phenolic laminate tray
Rotates closely below keyboard for ultimate mousing comfort
Low profile design allows maximum kneespace while stored
Transfer mouse tray from right to left using simple tools

Optical Mouse-Ready Pad Options:
Standard black Lexan^® with repositionable plastic mouse retainer with integral cord clip
Molded gel with black lycra fabric covering with integral raised perimeter mouse retainer

Mouse tray swivels for working comfort and stores conveniently under keyboard tray.

Transfer mouse tray from right to left using simple tools.

Mouse Pad Options

(A) Standard black Lexan^® mouse pad

(B) Molded black lycra gel mouse pad.

Keyboard trays

Item Number	Palm Rest	Mouse Pad
500GA	Gel	Lexan^®
500GB	Gel	Gel
500LA	Leather look	Lexan^®
500LB	Leather look	Gel

Recommended Articulating Arms

OptiRange^TM Articulating Arms

Item Number	Articulating Arm	Length/Track Style
R5XE19	Revolution	19" Glide
RMXE22	Revolution Max Sit/Stand	21 3/4" Glide
5NXE19	Profile	19" Glide

See complete OptiRange^TM arm specifications, alternate track lengths, and other specialty arms.

Revolution R5XE19
Intuitive Tilt

Revolution Max Sit/Stand
RMXE22 Intuitive Tilt

Profile 5NXE19
Manual Tilt

Applications for 500 Series Keyboard Trays with Recommended Articulating Arms

Straight Worksurfaces:

Condition: Unobstructed depths of 19” or greater. For sit/stand arm, depth 22” or greater. For lesser depths, see arm options pages click here.

Radiused Corner Worksurfaces

Condition: A minimum radius of 12” and unobstructed depth of 19” or greater. For sit/stand arm, depth 22” or greater.

Radius Calculation:
Dimension A minus Dimension B = Radius
OR
Dimension C minus Dimension D = Radius

Diagonal Corner Worksurfaces:

Condition: A minimum diagonal of 17” and unobstructed depth of 19” or greater. For sit/stand arm, depth 22” or greater.

Diagonal Calculation: If diagonal is not known, please call Customer Service with dimensions E though J for calculation.

For a radius less than 12” or a diagonal less than 17”, use square corner solution.

Square Corner Condition Solution I:

Condition: Two worksurfaces meet at right angles. A minimum diagonal of 17” and unobstructed depth of 19” or greater must be created. For sit/stand arm, depth 22” or greater. Select a Corner Maker to create this solution with trays and arms from this page.

Square Corner Condition Solution II:

Condition: Corner Maker Eliminators: Two worksurfaces meet at right angles, but aesthetics or user preference require that no Corner Maker be used. See our 700 Series Corner Maker Eliminator trays and arms.